About provisioning Jenkins with a service account

Whether you can or must provision Jenkins with a service account varies by security mode.

permissive: optional
strict: required

To increase the security of your cluster and conform to the principle of least privilege, we recommend provisioning Jenkins with a service account in permissive mode. Otherwise, Marathon and Metronome will act as if Jenkins was provisioned with a service account which has the superuser permission.

To set up a service account for Jenkins, complete the following steps.

Create a key pair.
Create a service account.
Create a service account secret.
Provision the service account with the necessary permissions.
Create a config.json file.

Requirement: In strict mode, the name of the service account must match the name that the service uses as its principal. By default, Jenkins uses jenkins-principal as the name of its principal. That’s the value that we use in the following procedures. Should you modify the default, you must change jenkins-principal throughout to match.

Note: We will use jenkins-secret as the name of the secret, jenkins-private-key.pem as the name of the file containing the private key, and jenkins-public-key.pem as the name of the file containing the public key. We recommend using these names, as it will make it easier to copy and paste the commands. If you change the names, make sure to modify the commands before issuing them.

Important: We store the secret in the jenkins path. This protects it from other services, so we do not recommend changing this.

Create a key pair

First, you’ll need to generate a 2048-bit RSA public-private key pair. While you can use any tool to accomplish this, the Enterprise DC/OS CLI is the most convenient because it returns the keys in the exact format required.

Prerequisite: You must have the DC/OS CLI installed and the Enterprise DC/OS CLI installed.

Create a public-private key pair and save each value into a separate file within the current directory.
```
dcos security org service-accounts keypair jenkins-private-key.pem jenkins-public-key.pem
```
Type ls to view the two new files created by the command. You may also want to open the files themselves and verify their contents.

Create a service account

About creating a service account

Next, you must create a service account. This section uses the Enterprise DC/OS CLI to accomplish this.

Prerequisite: You must have the DC/OS CLI installed, the Enterprise DC/OS CLI installed, and be logged in as a superuser via dcos auth login.

Use the following command to create a new service account called jenkins-principal with the public key you just generated.
```
dcos security org service-accounts create -p jenkins-public-key.pem -d "Jenkins service account" jenkins-principal
```
Verify your new service account using the following command.
```
dcos security org service-accounts show jenkins-principal
```

About creating a service account secret

Next, you need to create a secret associated with the service account that contains the private key.

Prerequisite: You must have the DC/OS CLI installed, the Enterprise DC/OS CLI installed, and be logged in as a superuser via dcos auth login.

Depending on your security mode, use one of the following commands to create a new secret called jenkins-secret in the jenkins path. Locating the secret inside the jenkins path will ensure that only the Jenkins service can access it. The secret will contain the private key, the name of the service account, and other data.

strict:
```
dcos security secrets create-sa-secret --strict jenkins-private-key.pem jenkins-principal jenkins-secret
```
permissive:
```
dcos security secrets create-sa-secret jenkins-private-key.pem jenkins-principal jenkins-secret
```
Create a file based secret with the jenkins private key:

Note: This step is required by the Jenkins master scheduler to authenticate with Mesos.
```
dcos security secrets create -f ./jenkins-private-key.pem jenkins/private_key
```
Ensure the secret was created successfully:
```
dcos security secrets list /
```
Optional: Now that you have stored the private key in the Secret Store, we recommend deleting the private key file from your file system. This will prevent bad actors from using the private key to authenticate to DC/OS. Skip this step if you want to try out Quota Enforced Multi-Tenant Jenkins
```
rm -rf jenkins-private-key.pem
```

Provision the service account with permissions

About the permissions

The permissions needed vary according to your security mode. In permissive mode, the Jenkins service account does not need any permissions. If you plan to upgrade at some point to strict mode, we recommending assigning them the permissions needed in strict mode to make the upgrade easier. The permissions will not have any effect until the cluster is in strict mode. If you plan to remain in permissive mode indefinitely, skip to Create a config.json file.

If you are in strict mode or want to be ready to upgrade to strict mode, continue to the next section.

Creating and assigning the permissions

The DC/OS Enterprise CLI can be used to rapidly provision the Jenkins service account. You must also log in via dcos auth login as a superuser.

Note: Replace nobody with the appropriate user for your deployment.


 dcos security org users grant jenkins-principal dcos:mesos:master:framework:role:* read
 dcos security org users grant jenkins-principal dcos:mesos:master:framework:role:* create
 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:role:* read
 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:role:* create
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:role:* read
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:role:* create
 
 dcos security org users grant jenkins-principal dcos:mesos:master:task:user:nobody create
 dcos security org users grant jenkins-principal dcos:mesos:agent:task:user:nobody create

 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:principal:jenkins-principal delete
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:principal:jenkins-principal delete

Create a config.json file

The contents of the config.json file will vary according to your security mode. We provide two examples below, one for each security mode. Locate the sample appropriate to your security mode, copy the JSON, paste it into a new file, and save it as config.json.

strict mode

{
  "service": {
    "name": "jenkins",
    "user": "nobody",
    "security": {
      "service-account": "jenkins-principal",
      "secret-name": "jenkins/private_key",
      "strict-mode": true
    }
  }
}

permissive mode

{
  "service": {
    "name": "jenkins",
    "user": "nobody",
    "security": {
      "service-account": "jenkins-principal",
      "secret-name": "jenkins/private_key",
      "strict-mode": false
    }
  }
}

If you have modified any of the values shown in the previous sections, change the values in the following JSON as appropriate.

Install Jenkins

To install the service, complete the following command.

dcos package install --options=config.json beta-jenkins

Quota enforced Multi-Tenant Jenkins

The DC/OS Jenkins service starting with DC/OS 2.0 supports multi-tenancy. Users should familiarize themselves with Quota and Resource Managment Primitives in DC/OS.

Note: We will use /dev/jenkins as the name of the service for the quota enabled multi-tenant examples below.

DC/OS 2.0 and later clusters dev will be the group in which the Jenkins service will be deployed as well as the role which the service will use. In strict mode, the service will require permissions granted for this dev role.
DC/OS 1.13 and older clusters dev will be the group in which the Jenkins service will be deployed. The role used by the service can be configured with the default of *. In strict mode, the service will require permissions granted for this * role.

Role used by Jenkins Agents

DC/OS 2.0 and later clusters - When quota is enforced on the group, the Jenkins agents will inherit the same role as the Jenkins master.
DC/OS 1.13 and older clusters - The role used by the Jenkins agents can be configured via service.roles.jenkins-agent-role in the configuration options.

Pre-requisites

Create a Key-Pair if you haven’t already done so.
Create a service account if you haven’t already done so.

Create a file based secret with the jenkins private key:

Note: This step is required by the Jenkins master scheduler to authenticate with Mesos.

Note: This step creates a key for dev/jenkins service.

dcos security secrets create -f ./jenkins-private-key.pem dev/jenkins/private_key

Creating and assigning the permissions

The DC/OS Enterprise CLI can be used to rapidly provision the Jenkins service account. You must also log in via dcos auth login as a superuser.

Note: Replace dev & nobody with the appropriate role and user for your deployment.


 dcos security org users grant jenkins-principal dcos:mesos:master:framework:role:dev read
 dcos security org users grant jenkins-principal dcos:mesos:master:framework:role:dev create
 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:role:dev read
 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:role:dev create
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:role:dev read
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:role:dev create
 
 dcos security org users grant jenkins-principal dcos:mesos:master:task:user:nobody create
 dcos security org users grant jenkins-principal dcos:mesos:agent:task:user:nobody create

 dcos security org users grant jenkins-principal dcos:mesos:master:reservation:principal:jenkins-principal delete
 dcos security org users grant jenkins-principal dcos:mesos:master:volume:principal:jenkins-principal delete

Create a config.json file

Note: roles.jenkins-master-role must match the quota role which is dev in this example.

strict mode

{
  "service": {
    "name": "dev/jenkins",
    "user": "nobody",
    "roles": {
      "jenkins-master-role": "dev"
    },
    "security": {
      "service-account": "jenkins-principal",
      "secret-name": "dev/jenkins/private_key",
      "strict-mode": true
    }
  }
}

permissive mode

{
  "service": {
    "name": "dev/jenkins",
    "user": "nobody",
    "roles": {
      "jenkins-master-role": "dev"
    },
    "security": {
      "service-account": "jenkins-principal",
      "secret-name": "dev/jenkins/private_key",
      "strict-mode": false
    }
  }
}

Install Jenkins

To install the service, complete the following command.

dcos package install --options=config.json beta-jenkins

Please see the Jenkins documentation for more information about how to use the JSON file to install the service.

Provisioning Jenkins for DC/OS

This topic describes when and how to provision Jenkins with a service account.

About provisioning Jenkins with a service account

Create a key pair

Create a service account

About creating a service account

About creating a service account secret

Provision the service account with permissions

About the permissions

Creating and assigning the permissions

Create a config.json file

Install Jenkins

Quota enforced Multi-Tenant Jenkins

Role used by Jenkins Agents

Pre-requisites

Create a file based secret with the jenkins private key:

Creating and assigning the permissions

Create a config.json file

Install Jenkins